Newest mods
Follow Me Mod 1.6.0.29.0
Farming Simulator 19 mods presentation: The (very helpful) Follow Me mod by Decker_MMIV.
If there ever will be a price for the most useful Farming Simulator addon, the Follow Me mod is sure to be one of the front runners. Here’s the elevator pitch: It allows you to control two or more vehicles simultaneously. In other words, it’s like playing Follow the Leader, but for vehicles.
Quick Follow Me Guide
There has to be a lead vehicle for the mod to work. This can be the vehicle you’re driving. Then, just drive the vehicle(s), that shall follow, close enough to the rear of the leader to pick up the trail. Now, press Right Ctrl + F on your keyboard to activate the following mechanism.
If you can’t activate Follow Me, try driving the follow-vehicle even closer. You can also try driving the leading vehicle forward a few meters.
A vehicle driven by an AI worker can also be the leader. Just remember that it’s best to set up all the followers before putting the artificial driver to work.
When you want to stop following the leader, just press Right Ctrl + F once more to disengage.
Set the Distance
It’s wise to set a proper distance for the follower before you start driving. Or before you activate the worker or Courseplay. If you’re in the vehicle that shall follow, this is done with Right Ctrl + W (closer) and Right Ctrl + S (further behind.)
It’s also possible to adjust the distance from the lead vehicle. Turn around to look at the follower. Then press Right Shift + W or Right Shift + S to set the distance.
Note that it’s doable to have the following vehicle driving ahead of the leader.
To the Sides
You can offset the followers to the left or the right, as well. This is particularly handy when you want a follower to chase a combine or a forage harvester. It can also be used for doing fieldwork faster, for example.
When inside the machine that shall follow, Right Ctrl + A offsets it to the left, while Right Ctrl + D does the trick for right side following.
When you press Right Ctrl + X now, the following vehicle will get back behind the leader. Pressing Right Ctrl + X once more, makes the follower switch to the opposite side.
To command the followers from the leading machine, just use the Right Shift button instead of Right Ctrl.
More Commands
The above guide should get you started with the Follow Me addon for Farming Simulator 19. There are a couple of other commands that can be useful, especially if you’re driving the leading tractor or truck:
First, there’s Right Shift + H – This makes the follower hold or resume following.
Then, there’s Right Shift + F – Using this command disengage the follower completely.
The rest is up to your imagination. There are tons of things you can do with this mod, like…
Doing Big Harvests.
Make Silaging More Efficient.
Or Create a Massive Convoy.
FS 19 Follow Me
Decker_MMIV’s Follow Me addon is with me all the time. I can’t play a new Farming Simulator game properly until it has been converted.
Oh, here’s a couple of tips:
Using the addon makes a dent in your wallet. The driver’s need to get paid…
The addon does not control implements. You need to activate and lower them manually before putting the pulling vehicle in a following state.
Here are some of its details:
Mod: Follow Me.
Credits: Decker_MMIV.
Category: Script Mods | Gameplay.
Errors: Nope.
Platforms: PC and Mac.
Changelog 1.6.0.29 – Collision On/Off
Decker_MMIV has just released an updated version of the mod. It has an added option for turning the collision detection sensor on or off (see the F1 Help menu.) The update also includes a fix for flashing lights and a small bug related to the 1.5.1 Patch.
If there ever will be a price for the most useful Farming Simulator addon, the Follow Me mod is sure to be one of the front runners. Here’s the elevator pitch: It allows you to control two or more vehicles simultaneously. In other words, it’s like playing Follow the Leader, but for vehicles.
Quick Follow Me Guide
There has to be a lead vehicle for the mod to work. This can be the vehicle you’re driving. Then, just drive the vehicle(s), that shall follow, close enough to the rear of the leader to pick up the trail. Now, press Right Ctrl + F on your keyboard to activate the following mechanism.
If you can’t activate Follow Me, try driving the follow-vehicle even closer. You can also try driving the leading vehicle forward a few meters.
A vehicle driven by an AI worker can also be the leader. Just remember that it’s best to set up all the followers before putting the artificial driver to work.
When you want to stop following the leader, just press Right Ctrl + F once more to disengage.
Set the Distance
It’s wise to set a proper distance for the follower before you start driving. Or before you activate the worker or Courseplay. If you’re in the vehicle that shall follow, this is done with Right Ctrl + W (closer) and Right Ctrl + S (further behind.)
It’s also possible to adjust the distance from the lead vehicle. Turn around to look at the follower. Then press Right Shift + W or Right Shift + S to set the distance.
Note that it’s doable to have the following vehicle driving ahead of the leader.
To the Sides
You can offset the followers to the left or the right, as well. This is particularly handy when you want a follower to chase a combine or a forage harvester. It can also be used for doing fieldwork faster, for example.
When inside the machine that shall follow, Right Ctrl + A offsets it to the left, while Right Ctrl + D does the trick for right side following.
When you press Right Ctrl + X now, the following vehicle will get back behind the leader. Pressing Right Ctrl + X once more, makes the follower switch to the opposite side.
To command the followers from the leading machine, just use the Right Shift button instead of Right Ctrl.
More Commands
The above guide should get you started with the Follow Me addon for Farming Simulator 19. There are a couple of other commands that can be useful, especially if you’re driving the leading tractor or truck:
First, there’s Right Shift + H – This makes the follower hold or resume following.
Then, there’s Right Shift + F – Using this command disengage the follower completely.
The rest is up to your imagination. There are tons of things you can do with this mod, like…
Doing Big Harvests.
Make Silaging More Efficient.
Or Create a Massive Convoy.
FS 19 Follow Me
Decker_MMIV’s Follow Me addon is with me all the time. I can’t play a new Farming Simulator game properly until it has been converted.
Oh, here’s a couple of tips:
Using the addon makes a dent in your wallet. The driver’s need to get paid…
The addon does not control implements. You need to activate and lower them manually before putting the pulling vehicle in a following state.
Here are some of its details:
Mod: Follow Me.
Credits: Decker_MMIV.
Category: Script Mods | Gameplay.
Errors: Nope.
Platforms: PC and Mac.
Changelog 1.6.0.29 – Collision On/Off
Decker_MMIV has just released an updated version of the mod. It has an added option for turning the collision detection sensor on or off (see the F1 Help menu.) The update also includes a fix for flashing lights and a small bug related to the 1.5.1 Patch.
Farming Simulator 19 mods presentation: The (very helpful) Follow Me mod by Decker_MMIV. If there ever will be a price for the most useful Farming Simulator addon, the Follow Me mod is sure to be one of the front runners. Here’s the elevator pitch: It allows you to control two or more vehicles simultaneously. In other words, it’s like playing Follow the Leader, but for vehicles. Quick Follow Me Guide There has to be a lead vehicle for the mod to work. This can be the vehicle you’re driving. Then, just drive the vehicle(s), that shall follow, close enough to the rear of the leader to pick up the trail. Now, press Right Ctrl + F on your keyboard to activate the following mechanism. If you can’t activate Follow Me, try driving the follow-vehicle even closer. You can also try driving the leading vehicle forward a few meters. A vehicle driven by an AI worker can also be the leader. Just remember that it’s best to set up all the followers before putting the artificial driver to work. When you want to stop following the leader, just press Right Ctrl + F once more to disengage. Set the Distance It’s wise to set a proper distance for the follower before you start driving. Or before you activate the worker or Courseplay. If you’re in the vehicle that shall follow, this is done with Right Ctrl + W (closer) and Right Ctrl + S (further behind.) It’s also possible to adjust the distance from the lead vehicle. Turn around to look at the follower. Then press Right Shift + W or Right Shift + S to set the distance. Note that it’s doable to have the following vehicle driving ahead of the leader. To the Sides You can offset the followers to the left or the right, as well. This is particularly handy when you want a follower to chase a combine or a forage harvester. It can also be used for doing fieldwork faster, for example. When inside the machine that shall follow, Right Ctrl + A offsets it to the left, while Right Ctrl + D does the trick for right side following. When you press Right Ctrl + X now, the following vehicle will get back behind the leader. Pressing Right Ctrl + X once more, makes the follower switch to the opposite side. To command the followers from the leading machine, just use the Right Shift button instead of Right Ctrl. More Commands The above guide should get you started with the Follow Me addon for Farming Simulator 19. There are a couple of other commands that can be useful, especially if you’re driving the leading tractor or truck: First, there’s Right Shift + H – This makes the follower hold or resume following. Then, there’s Right Shift + F – Using this command disengage the follower completely. The rest is up to your imagination. There are tons of things you can do with this mod, like… Doing Big Harvests. Make Silaging More Efficient. Or Create a Massive Convoy. FS 19 Follow Me Decker_MMIV’s Follow Me addon is with me all the time. I can’t play a new Farming Simulator game properly until it has been converted. Oh, here’s a couple of tips: Using the addon makes a dent in your wallet. The driver’s need to get paid… The addon does not control implements. You need to activate and lower them manually before putting the pulling vehicle in a following state. Here are some of its details: Mod: Follow Me. Credits: Decker_MMIV. Category: Script Mods | Gameplay. Errors: Nope. Platforms: PC and Mac. Changelog 1.6.0.29 – Collision On/Off Decker_MMIV has just released an updated version of the mod. It has an added option for turning the collision detection sensor on or off (see the F1 Help menu.) The update also includes a fix for flashing lights and a small bug related to the 1.5.1 Patch.
Share this mod with Friends:
